Kamis, 25 Desember 2008

Quick Install Card Banyan Vines

Banyan VINES Network Quick Install Card

Xerox Document Centre 240/255/265 LP/ST

Before You Start

If your printer is equipped with a Token Ring interface you must enable TCP/IP and use lpr to submit print jobs. Use the Token Ring Quick Install Card supplied in this Quick Install Card set to set the Ring Speed and Source Routing settings for your environment.

Go to the printer and...

1. Connect your Document Centre to the network with the appropriate cabling.

2. Enter the Tools pathway

a) Press the Access ( ) button.

b) On the keypad enter 1111 or the current password. Press the Enter button when finished. If your printer is an ST model press the Go to Tools button, otherwise skip to the next step.

c) The Touch Screen will be used for the remainder of the data entry.

3. Enable Banyan VINES printing.

a) Press the Connectivity and Network Setup button.

b) At the next screen, press the Network Setup button.

c) At the next screen, press the Banyan VINES button.

d) At the next screen, press the Protocolbutton.

e) At the next screen, press the Enable button to start the Banyan Vines protocol and press Save.

4. Configure User Name settings and Password.

a) At the next screen, press the Settingsbutton.

b) At the next screen, press the User Name/PC Print Destination button, enter the desired text for this item using the touch panel keys, then press Save.

c) Press the User Password button, enter the desired text for this item using the touch panel keys, then press Save.

d) Press the Print Service Name button, enter the desired text for this item using the touch panel keys, then press Save.

e) Press the Exit Tools button.

5. Wait a MINIMUM of 7 minutes for the printer to reset.

a) Obtain a Configuration Report page from your printer.

b) Check the Configuration Report page and verify that Banyan VINES is enabled and the other Banyan Settings are correct.

6. From the documentation package supplied with your printer, retrieve the CentreWare Network Services CD-ROM (CD-ROM 2) and the document entitled Getting Started with Print and Fax Services. Proceed to the next section of this procedure called Go to the server and...

Go to the server and...

1. Configure the Service and Queue.

a) Using the MUSER utility, create a user name and assign a password for the printer. The user name and password must be the same that were entered at the Document Centre.

b) Using the MSERVICE utility, highlight and select ADD a server-based service.

c) At the Add A Service screen, enter the StreetTalk name and description when prompted.

d) Select the server on which you want to create the service.

e) Select Banyan Print Service.

f) Select an appropriate disk location when prompted.

g) A message will be displayed stating that the service is running, but is not yet available to users.

h) Press the F10 key to continue.

i) The Configure Queue screen will be displayed.

j) Press the F10 key to accept the defaults.

2. Configure the Paper Formats.

a) The Configure Paper Formats Screen will be displayed.

b) Press the Escape key to continue without making any changes.

3. Configure Access Lists and Print Destination.

a) The Access Lists Screen will be displayed.

b) Press the F10 key to accept the defaults.

c) The Add a Destination Screen will be displayed.

d) Select PCPrint and press Enter.

e) From the Destination Attributes Screen, enter the Document Centre user name as the PCPRINT ST nameand Description, and then press the F10 key. Note The PCPrint ST name must be the same as the user name created and must also match the Street Talk (user) Name entered at the printer.

f) The Output Strings Screen will be displayed. Press the F10 key to accept the defaults displayed on the screen.

g) The Enable Strings Screen will be displayed. Press the F10 key to accept the defaults displayed on the screen.

h) Select No and press Enter when you are prompted to add another destination.

4. Enable the Print Queue

a) The Print Queue Status screen will be displayed.

b) Change the Printing jobs and the Accepting jobs fields to Yes and then press the F10 key.

c) A message will be displayed stating that the printer is ready to accept and print jobs. Press the F10 key to continue.

d) The Manage A Service screen will be displayed.

e) Press the Escape Key to return to the Manage Services main menu.

5. Power off and power on the Document Centre 240/255/265 for these setup options to take effect.

Rabu, 24 Desember 2008

GAMBAR NOS




Perkembangan Network Opeating System




Gambar arsitektur prosesor independent


Gambar Stream dan ODI


Gambar Design Netware 386 yang Moduler


Gambar Elemen Banyan Vines pada sisi SERVER



Gambar elemen Banyan Vines pada sisi Work station

NOS

Network Operating Sistem

Network Operating System merupakan perangkat lunak yang mengatur pelayanan yang berkaitan dengan jaringan. Trend yang ada pada saat ini adalah NOS yang tidak bergantung pada jenis perangkat keras.

CONTOH NETWORK OPERATING SYSTEM

1 Novel Netware

Netware protocol diimpelementasilan dengan menggunakan mekanisme Open Data Link Interface (ODI). Komponen utama dari model ODI ini adalah Multiple Link Interface Driver (MLID) dan Link Support Lay er (LSL). Dengan mekanisme ini memungkinkan penanganan beragam protocol dan perangkat keras dengan mudah.

Protocol asli Netware adalah Netware Core Protocol (NCP), Sequence Packet Exchance (SPX) dan Internet Excange Protocol (IPX). IPX merupakan connectionless (tiga layer pertama) d an SPX adalah connection oriented (layer ke empat) Pelayanan dilakukan dengan menggunakan Service Advertising Protocol (SAP).

2 Banyan VINES

VINES operating system berdasarkan UNIX System V. Terdiri dari workstion module dan server module. Physical dan Data Link Layer membolehkan hampir seluruh protocol yang mungkin digunakan termasuk asyncrhonouse, HDLC, IEEE 802.X, X.25. Device driver digunakan untuk berhbungan dengan beragam card komunikasi.

Network Layer mendukung DoD IP, ARP, ICMP, termasuk VINES : IP, RTP, ARP, ICP. Transport layer mengimplementasikan : DoD, TCP dan UDP ditambah VINES model untuk IPC (Interprocess Communication) dan SPP (Sequence Packet Protocol). Lapisan yang lebih tinggi mendukung berbagai aplikasi, termasuk Microsoft SMB (Server Message Block).

3. Microsoft Windows NT

Windows NT adalah suatu sistem operasi 32-bit yang mempunyai kemampuan multitasking, multiprocessing dan dijalankan Prosesor Intel dan Alpha.

Didalamnya terdapat suatu sistem sekuriti (diatas level C2) dengan pengakasesan secara sentral untuk seluruh sumber daya baik di komputer lokal maupun komputer remote yang terhubung dengan jaringan.

EXECUTIVE

Dalam Windows NT, software berjalan di kernel yang disebut executive.

Didalamnya terdapat Microsoft Win32® interface untuk user dan programmer window terdahulu serta interface POSIX.

Subsystems dan services mengakses executive melalui system services.

Executive berisikan object manager, security reference monitor, process manager, local procedure call facility, memory manager, dan input/output (I/O) manager.

Hardware Abstraction Layer (HAL)

Mendukung Windows NT untuk menggunakan platform hardware yang berbeda seperti Intel x86, Pentium, and DEC Alpha.

Memetakan platform-fitur yang spesifik ke dalam duatu interface hardware yang generic digunakan oleh Windows NT executive

Registry

Windows NT menyimpan security dan setting sistem kedalam suatu database yang disebut registry.

Jika di UNIX disimpan pada direktori /etc. Administrasi Windows NT bersifat centralized dan generalized. Windows NT registry secara otomati melakukan backup copy yang dapat di retrieve.

Service Pack & Hotfixes

Windows NT mempunyai patches dan fixes untuk mengatasi masalah dalam address yang ditemukan pada suatu sistem operasi. Ada dua bentuk yaitu service packs dan hotfixes.

Service Packs

berisikan patches dan hotfixes yang merupakan solusi mengatasi problems pada sistem operasi dan software lainnya. Juga berisikan tambahan kemampuan ke sistem operasi.

Hotfixes

berisikan patches untuk software function atau package khusus, termasuk security hole atau problem yang ditemukan pada service pack.


Sabtu, 13 Desember 2008

Banyan Vines

Banyan VINES (singkatan dari Virtual Integrated Network Service) adalah sebuah sistem operasi jaringan yang populer pada akhir dekade 1980-an hingga awal dekade 1990-an yang banyak digunakan dalam jaringan-jaringan korporat.

VINES pada awalnya dibuat berdasarkan protokol jaringan yang diturunkan dari Xerox Network Systems (XNS). VINES sendiri menggunakan arsitektur jaringan terdistribusi klien/server yang mengizinkan klien-klien agar dapat mengakses sumber daya di dalam server melalui jaringan. Fitur-fitur yang diusung oleh Banyan VINES antara lain adalah:

Klien-klien yang didukung oleh VINES antara lain:

Selain itu, Banyan VINES juga menawarkan aplikasi yang dapat mengintegrasikan jaringan Windows NT (NetBEUI), AppleTalk, dan jaringan UNIX ke dalam sebuah jaringan dengan Banyan VINES sebagai pusatnya.

Stack protokol Banyan VINES teridi atas lima lapisan yang dapat dipetakan ke dalam tujuh lapisan model referensi OSI, yakni sebagai berikut:

  • Lapisan fisik dan lapisan data-link: VINES dapat beroperasi di atas jaringan Ethernet, Token Ring, X.25, dan beberapa jenis teknologi dan arsitektur jaringan lainnya.
  • Lapisan network: Protokol yang digunakan pada lapisan ini adalah VINES Internetwork Protocol (VIP) yang sebenarnya mirip dengan protokol IP dalam protokol TCP/IP. VIP dapat melakukan enkapsulasi terhadap data dan meneruskannya ke tujuan dengan menggunakan alamat dengan panjang 48-bit, yang terdiri atas 32-bit alamat jaringan dan 16-bit alamat host.
    Penetapan alamat dinamis dan proses resolusi alamat semuanya dilakukan oleh server yang menjalankan Banyan VINES, yang sering disebut sebagai Service Node. Klien-klien VINES akan dapat memperoleh alamat mereka secara dinamis dari server yang terdekat dengan dirinya di dalam jaringan. Sementara itu, router dan tabel routing akan dipelihara dengan menggunakan pengumuman periodik (announcement) dari klien ke server dan sebaliknya.
    Protokol lapisan network lainnya yang didukung adalah Address Resolution Protocol (ARP), Internet Control Protocol (ICP), dan Routing Table Protocol (RTP).
  • Lapisan transport: Untuk menyampaikan data secara reliable dengan menggunakan acknowledgment serta pengurutan, VINES menggunakan layanan Reliable Message Service. Layanan lainnya, Unreliable Datagram Service hanya mendukung penyampaian paket secara best-effort. Selain itu, Data Stream Service dapat mentransmisikan jumlah data yang besar dengan menggunakan virtual circuit yang dilengkapi dengan mekanisme flow-control yang baik.
  • Lapisan sesi dan lapisan presentasi: VINES mengimplementasikan menkanisme Remote Procedure Call (RPC) standar untuk mengizinkan komunikasi antara komponen klien VINES dan komponen server VINES yang berjalan di dalam node-node berbeda di dalam jaringan.
  • Lapisan aplikasi: VINES mendukung layanan berbagi berkas, berbagi alat pencetak, layanan direktori, dan beberapa protokol lainnya.